Garage Door Spring Repair Near You in Cornelius, NC

Two Types of Garage Door Springs 

Most homes in Cornelius, NC have one of two spring types, and each has its own personality when it comes to repairs. Luckily, our experts at Nabors Garage Doors can handle them all! 

Torsion springs sit above your garage door and twist to provide lifting power. These are the workhorses of the garage door world. They’re mounted horizontally across the top of your door, and when they break, you’ll see a gap in the coils about 2-4 inches wide. Torsion springs typically last around 15,000 cycles, which translates to about 10-14 years for most families.

Extension springs run along the sides of your door and stretch like a rubber band. They’re less common in newer homes, but we still see plenty of them around Cornelius. When these break, your door might come up crooked or not at all. Extension springs usually give you about 10,000 cycles before calling it quits.

Types of Garage Door Openers We Install Near You in Cornelius, NC

Your garage door will usually give you some hints before the springs completely fail. Here’s what to watch for:

• There’s visible rust or corrosion on the springs. With our humidity levels here, this is pretty common. Rust weakens the metal and shortens the spring’s life.
• Your door is moving more slowly than usual. If it’s taking forever to open, your springs might be wearing out. We see this a lot in older neighborhoods.
• The door feels heavier when you try to lift it manually. Disconnect your opener and try lifting the door halfway. If it stays put, you’re good. If it drops, your springs need attention.
• You’re hearing creaking or groaning sounds. A little noise is normal, but if your garage sounds like a haunted house, something’s wrong.
• The door opens unevenly or at an angle. This usually means one spring is working harder than the other, or one has already broken.

Why Shouldn’t I DIY Garage Door Spring Repair?

Look, we get it. YouTube makes everything look easy. But garage door spring repair isn’t the place to test your DIY skills. These springs are under incredible tension, enough to seriously hurt you if they snap back unexpectedly.

We’ve had customers tell us horror stories about trying to fix their own springs. The emergency room bill for attempting  DIY garage door spring repair will always be way more than a simple spring replacement! 

Professional technicians have the right tools and training to release that tension safely. We use winding bars, safety cables, and know exactly how many turns each spring needs. It’s not worth risking injury or property damage to save a few bucks.

What Happens During a Garage Door Spring Replacement or Repair

When Nabors Garage Doors comes out for your garage door spring replacement, here’s what you can expect.

First, we’ll secure your door so it will stay steady during the garage door repair. We always encourage safety above all else! Then we’ll release the tension from the old springs and remove them from your garage door system. This is where experience really matters.

Next, we’ll install new springs that support your door’s weight and size. This is very important because a spring that’s too weak won’t lift your door properly, while one that’s too strong could damage your opener or cause the door to fly up too fast.

We always replace springs in pairs, even if only one is broken. Why? Because if one spring broke, its partner probably isn’t far behind. They’ve been doing the same work for the same amount of time. Replacing both now saves you from another service call in a few months.

After installation, we’ll balance your door, lubricate all moving parts, and test everything multiple times. The whole process usually takes about an hour, sometimes less if everything goes smoothly.

Keeping Your Garage Door Springs Healthy

Want to get the most life out of your springs? A little maintenance goes a long way. Every few months, spray some silicone-based lubricant on the springs. Not WD-40, that’s not a lubricant. Look for actual garage door lubricant at your hardware store.

Keep an eye out for rust, especially during our humid summers. If you catch it early, you can sand it off and apply some lubricant to protect the metal. And if your door starts making weird noises or moving strangely, don’t ignore it. Small problems are always cheaper to fix than big ones.

When to Call Nabors Garage Doors for Garage Door Spring Replacement Near You

If you’re dealing with a broken spring right now, don’t wait. A garage door without working springs is essentially a 300-pound wall. Plus, trying to force it open can damage your opener, tracks, or the door itself.

We serve all of Cornelius, NC, from Peninsula to Westmoreland, and everywhere in between. Our technicians know the local neighborhoods and can usually give you a pretty accurate arrival time. We stock the most common spring sizes for homes in our area, so we can often complete repairs in a single visit.

Remember, your garage door is probably the largest moving object in your home. When something goes wrong with the springs, you need someone who knows what they’re doing. 

That’s where Nabors Garage Doors comes in. We’ve been fixing garage doors in Cornelius, NC long enough to see every possible spring problem, and we know how to fix them right the first time.
Give us a call when you need garage door spring repair or garage door spring replacement. We’ll get your door working smoothly again, and you can get back to your day without worrying about being trapped in (or out of) your garage.